GeoPix.0.9.3327 UPDATE

==================================== GeoPix.0.9.3327 REQUIRES: Touch Designer Build 59770 ==================================== – BUG FIXED: Panels were not updating in the signal chain outliner as well as the led counter text above the signal chain. – BUG FIXED: Panels can start with numbers in the name. This is due to recent changes in touch designer naming convention rules. Be sure to update to the …

Euphoria Main Archway Lighting Project!

Just recently I wrapped up an impromptu lighting project in collaboration with Brian and Shane from Digital Permaculture. They built several awesome arches that were used at Euphoria Music festival here in Austin. Using a lot of on hand equipment and techniques used previously in my 16 panel setup  I was able to fabricate the led tubes and hardware and ...

16 Panel led system @ Zyn22 Grand opening party

Our 16 Panel system saw it's debut performance at Zyn22's grand opening party this last Thursday! Dan from LucidLighting.net and I had a great time collaborating on this project after installing the very same lights in the studio weeks earlier. I focused on bringing some generative real time content to my led panels while designing a tablet interface in TouchOSC ...

16 Panel Led Lighting System Finished!

This was a project that tested almost every skill and area of expertise I've been honing the last couple years. From designing the modular physical panels, perfecting the 3d printed parts, and then later to writing code for micro controllers, designing a VJ system in Touch Designer, and creating animations and content for the system. Thank you friends, thank you ...

6 / 16 Panels Finished! – WIP update

Lot's of progress on the 16 panel build, check out the video and pictures below: A Teensy 3.1 / Arduino board is driving the led panels @ 60 FPS through a OctoWs2811 adapter board, receiving data from the computer over serial from a custom vj setup I've laid out in Touch Designer 088. Panels mare made primarily of 3d printed ...